BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
11.1. General information and security measures
11.2. Replacement of brake shoes
11.3. Removal and installation of brake disks
11.4. Removal and installation of supports
11.5. Replacement of brake shoes of the parking brake and their razzhimny mechanism
11.6. Adjustment of the parking brake
11.7. Removal and installation of cables and pedal of the drive of the parking brake
11.8. Removal of D/V of stoplights and pedal of a working brake
11.9. Removal and GTTs installation and its tank
11:10. Removal and installation of the one-pass valve of the vacuum amplifier
11:11. Removal and installation of the vacuum amplifier
11:12. Removal and installation of wheel sensors
11:13. Removal and installation of an electronic control unit of the ABS/ASC+T/DSC systems
11:14. Removal and installation hydromodulator of the ABS/ASC+T/DSC systems
11:15. Removal and installation of sensors of cross acceleration of DSC3
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment


https://glamorlady.ru: цветная неделя диета

11-4-snyatie-i-ustanovka-supportov.html

11.4. Removal and installation of supports

Assembly of a motionless support of the forward brake mechanism

1 — the Support
2 — the Tube
3 — the Union for pumping with a boot
4 — the Bolt

5 — the Sensor of wear of brake shoes
6 — the Set of boots
7 — the Set of details of fastening
8 — Brake shoes

Assembly of a 2-piston floating support of the forward brake mechanism

1 — the support Case
2 — the Guide of brake shoes
3 — the Holding spring
4 — the Bolt
5 — the Union for pumping with a boot
6 — the Boot

7 — the Directing finger
8 — the Stopper
9 — the Sensor of wear of brake shoes
10 — consolidation Details
11 — the Directing plug from a repair kit
12 — the Repair kit of brake shoes

Assembly of a 1-piston floating support of the forward/back brake mechanism

1 — the support Case
2 — the Guide of brake shoes
3 — the Holding spring
4 — the Bolt
5 — the Union for pumping with a boot
6 — the Boot

7 — the Directing finger
8 — the Stopper
9 — the Sensor of wear of brake shoes
10 — consolidation Details
11 — the Directing plug from a repair kit
12 — the Repair kit of brake shoes


 PERFORMANCE ORDER

  1. Remove wheels.
  1. Establish a strut for a pedal of a brake and to press slightly a pedal. When opening lines of a hydraulic actuator of brakes it will prevent an effluence of brake fluid from the tank, and also hit in the air device.
  1. On back brake mechanisms turn out bolts (1) and disconnect a brake hose (2). On the right separate the socket of the sensor of wear of brake shoes. Remove a support the movement back.
  1. On forward brake mechanisms disconnect a brake hose from a tube.
  1. At the left separate the socket of the sensor of wear of brake shoes. Turn out bolts (1) and remove a support.
  1. In need of repair of a support address the illustrations Assembly of a Motionless Support of the Forward Brake Mechanism, Assembly of a 2-piston Floating Support of the Forward Brake Mechanism, Assembly of a 1-piston Floating Support of the Forward/back Brake Mechanism .
  2. Installation is made upside-down. Do not allow a tension of a brake hose. At installation of supports of back wheels first of all delay fastening of a brake hose to a support, and then – to a tube.
  3. Check laying and fastening of an electrical wiring of the sensor of wear of brake shoes.
  4. Upon termination of works pump over the brake system (see the Head Nastroyki and routine maintenance of the car).

"previous page
11.3. Removal and installation of brake disks		 following page"
11.5. Replacement of brake shoes of the parking brake and their razzhimny mechanism