BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
8.1. Manual box of gear shifting
8.2. Coupling
8.2.1. General information
8.2.2. Removal and installation of coupling
8.2.3. Replacement of the release bearing and fork of switching off of coupling
8.2.4. Replacement of the main cylinder of coupling
8.2.5. Replacement of the executive cylinder
8.2.6. Removal and installation of a pedal of coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment


Мебельный щит ясень цельноламельный спб смотрите на http://www.spbbastion.ru.


8-2-4-zamena-glavnogo-cilindra-scepleniya.html

8.2.4. Replacement of the main cylinder of coupling

 PERFORMANCE ORDER

  1. Lower or pump out brake fluid so that its level reached the level of the place of connection of the feeding pipeline of a hydraulic actuator (1) of coupling. Disconnect the feeding pipeline from the tank.
  1. Removal the left lower part of facing of the dashboard (see the Head Kuzov).
  1. Remove a clamp (1) and take out a pin.
  1. Turn out fastening bolts.
  1. Remove a clamp (1), disconnect from the main cylinder (2) drives of coupling the pipelines going to the executive cylinder and remove it together with the feeding pipeline (going to a tank).

Do not allow hit of brake fluid on a carpet of salon.

  1. Installation is made upside-down. In conclusion pump over a coupling hydraulic actuator.


"previous page
8.2.3. Replacement of the release bearing and fork of switching off of coupling
following page"
8.2.5. Replacement of the executive cylinder