
BMW 7_aya the E38 series from 1994 to 2002
	1. Introduction
	2. Governing bodies and methods of operation
	3. Settings and routine maintenance of the car
	4. Engine
	5. Cooling systems of the engine, heating, ventilation and air conditioning
	6. A power supply system and production of the fulfilled gases
	7. Systems of electric equipment of the engine
	8. Manual box of gear shifting and coupling
	9. Automatic transmission
	10. Cardan and power shafts, reducer, differential and stupichny assemblies
	11. Brake system
	12. Suspension bracket and steering
	13. Body
		13.1. External equipment and body elements
		13.2. Equipment of salon
	14. Onboard electric equipment
	15. Schemes of electric equipment

13-kuzov.html

13. Body

Specifications

Gaps between doors, doors and a body, a cover of the luggage compartment and a body, mm	4 ± 1
Maximum admissible size of unevenness of a gap, mm	1
Shift of the plane of a door/cover of the luggage compartment concerning the body plane, no more, than a mm	1

Gaps between a cowl and headlights / a front bumper, mm

a —	4 ± 1
b —	5
b —	5	- 1
with —	2.5 ± 1

Ledge of a forward edge of a cowl of rather top edge of the lens of a headlight, mm

Gaps on windows and doors, mm

A — A:
a —	5	0.5
		- 1
b —	21	1
		- 1.5

B — B:
a — 12 ± 1.5
b — 12 ± 2

With — C:
Pretightness
a — 2.5 ± 1
b — 12 ± 1.5
with — 12 ± 2
The D—D:
Pretightness
a — 1.5 ± 1
b — 12 ± 1.5
with — 12 ± 2

E — E:
a — 12 ± 2
b — 37 ± 1.5

F — F:

a —

21

1

- 1.5

b —

5

0.5

- 1

H — H:
and —	5	0.5
		- 1
b —	21	1
		- 1.5

I \I:
a —	21	1
		- 1.5
b —	7	0.5
		- 1
G — G:
a —	12 ± 2
b —	12 ± 2
with —	5.5	0.5
		- 1

L-L:
a —	2 ± 1
K-K:
a —	21	1
		- 1.5
b —	7	0.5
		- 1

Control body sizes, mm

Admissions on the sizes to/over 1000 mm make respectively ± 1/± 2 mm. In brackets the sizes for execution with the extended base L are specified; in double brackets – for execution with the extended L7 base.


A — the Arm of a forward shock damper B — Fastening of a forward rack of the shock-absorber With — the Forward top platform under a jack D — the Back top platform under a jack	G — Fastening of a back rack of the shock-absorber P — the Axis of the center of forward top motionless loops Q — the Axis of the center of forward lower motionless loops R — the Axis of the center of back top motionless loops S — the Axis of the center of back lower motionless loops


P — the Axis of the center of forward top motionless loops Q — the Axis of the center of forward lower motionless loops	R — the Axis of the center of back top motionless loops S — the Axis of the center of back lower motionless loops


A — the Arm of a forward shock damper B — Fastening of a forward rack of the shock-absorber	With — the Forward top platform under a jack H — Forward fastening of a beam of the forward bridge I \Back fastening of a beam of the forward bridge


D — the Back top platform under a jack E — Forward fastening of a beam of the back bridge F — Back fastening of a beam of the back bridge	G — Fastening of a back rack of the shock-absorber M — the Arm of a back shock damper O — Seredina of a trunk floor

B — Fastening of a forward rack of the shock-absorber
G — Fastening of a back rack of the shock-absorber

E — Forward fastening of a beam of the back bridge
F — Back fastening of a beam of the back bridge
H — Forward fastening of a beam of the forward bridge


A — the Arm of a forward shock damper B — Fastening of a forward rack of the shock-absorber H — Forward fastening of a beam of the forward bridge	I \Back fastening of a beam of the forward bridge J — Prilegany beams of the forward bridge K — the Forward console of a beam of fastening of the transmission L — the Average console of a beam of fastening of the transmission


E — Forward fastening of a beam of the back bridge F — Back fastening of a beam of the back bridge	G — Fastening of a back rack of the shock-absorber M — the Arm of a back shock damper N — the Cross beam of a trunk floor, diameter is 20 mm

Efforts of tightening of threaded connections, Nanometer
Front bumper with an arm to a shock damper	41
Shock damper / arm of a front bumper to a body	9
Back bumper / a basic beam to a shock damper	45
Seat belt to a body (except the central rack)	48
Seat belt to the central rack	31
Bolts of the mechanism of adjustment of a seat belt on height to a body	24
Finishing of a back rack to a body	3
Front seat to the body bottom	42
Slip to a guide of a front seat	4
Framework of a front seat to a seat guide	15
Back of a back seat to a body	5
Driving cables of a cover of the top hatch to the cartridge	1.3
Glass cover to the coulisse	4.5
The movable panel of a ceiling to the coulisse	1.5
Support of a wind-shelter wall to the cartridge	1.2
Emphasis to the movable panel of a ceiling (the hatch with a glass cover)	0.9

"previous page
12.5.10. The angles of installation of wheels of the car - the general information

following page"
13.1. External equipment and body elements