BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.1.1. Removal and installation of a forward wing
13.1.2. Removal, installation and adjustment of doors
13.1.3. Removal, installation and adjustment of a cowl, replacement of its racks
13.1.4. Removal, installation and adjustment of a cover of the luggage compartment, replacement of its components
13.1.5. Removal and installation of a front bumper and its components
13.1.6. Removal and installation of a rear bumper and its components
13.1.7. Replacement and adjustment of mobile glasses of doors
13.2. Equipment of salon
14. Onboard electric equipment
15. Schemes of electric equipment

13-1-naruzhnoe-oborudovanie-i-kuzovnye-ehlementy.html

13.1. External equipment and body elements

Removal and installation of a forward wing

 PERFORMANCE ORDER

  1. Open a cowl and remove or disconnect the following details:
    • Loker of a lobby wheel arches;
    • Forward index of turn;
    • Front bumper assembled and its slip;
    • Floor covering;
  2. Top facing of a wing.
  3. Give fixture.
Lower bolts of fastening of a forward wing
Screw of fastening of a forward wing
Back bolts of fastening of a forward wing (at an open door)
Top bolts of fastening of a forward wing
  1. Record a cowl so that not to damage a windshield and the next details of a body. Turn out bolts (1 and 2) and remove a wing.
  2. Installation is made upside-down. Expose a wing so that gaps between a wing and a door/cowl were uniform. Cover with sealant connecting edges. Check installation of a cowl and, if necessary, adjust gaps (see Specifications in the Head Kuzov).

"previous page
13. Body		 following page"
13.1.1. Removal and installation of a forward wing