|
|
|
12-4-3-zamena-datchikov-dorozhnogo-prosveta-edc.html
12.4.3. Replacement of sensors of a road gleam of EDC
|
|
After installation of the sensor check and if necessary modify an inclination of headlights (see the Head Onboard electric equipment). |
Forward sensor
|
|
|
|
- Separate the socket (1), give a nut (2) and disconnect the lever of the sensor of a road gleam. Turn out screws (3) and remove the sensor.
|
|
|
At installation the lever (4) has to be turned outside. |
|
|
- When replacing the lever of the sensor open a bracket (1).
|
- Installation is made upside-down. The holder has to be between two inflows (2). Be convinced of correctness of installation of a bracket (1).
|
|
Back sensor
|
|
|
|
- Separate the socket (2), give a nut (3) and disconnect the lever of the sensor of a road gleam.
|
- Turn out screws (1) and remove the sensor.
- Installation is made upside-down. The lever (4) has to be turned outside.
|
|
|
|
|