BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
8.1. Manual box of gear shifting
8.2. Coupling
8.2.1. General information
8.2.2. Removal and installation of coupling
8.2.3. Replacement of the release bearing and fork of switching off of coupling
8.2.4. Replacement of the main cylinder of coupling
8.2.5. Replacement of the executive cylinder
8.2.6. Removal and installation of a pedal of coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment

8-2-6-snyatie-i-ustanovka-pedali-scepleniya.html

8.2.6. Removal and installation of a pedal of coupling

 PERFORMANCE ORDER

  1. Remove the left lower panel of facing of the dashboard (see the Head Kuzov).
  2. Remove the sensor of provision of a pedal of coupling.
  1. Remove lock brackets, a vypressuyta a finger (1) and remove a coupling pedal.

At installation establish a returnable spring (2).

  1. Installation is made upside-down. Check plugs and, if necessary, replace them, previously having slightly greased.

"previous page
8.2.5. Replacement of the executive cylinder		 following page"
9. Automatic transmission