14-4-1-snyatie-i-ustanovka-datchikov-i-antenn-vspomogatelnykh-sistem.html
14.4.1. Removal and installation of sensors and antennas of auxiliary systemsRemoval and installation of sensors and antennas of auxiliary systems Rain sensor
|
|
- Remove an internal rear-view mirror.
|
|
- Squeeze a cover from sides, displace it a little up, pick up and uncover.
|
|
|
At installation level a cover of rather sensitive element (black glass ceramics). |
|
|
- Extend fastening clips in the direction specified by an arrow and remove the rain sensor.
|
- At installation do not allow damage of the optical element which is under the rain sensor.
|
|
Sensors of system of the help at the parking
|
|
- Remove the central overlay of a rear bumper (see the Head Kuzov).
|
|
- Separate the socket and remove the sensor.
|
- Installation is made upside-down.
|
|
Sensors of side safety cushions
|
|
- Switch off ignition
- Remove a front seat and an overlay of a threshold from the relevant party (see the Head Kuzov).
|
|
- Cast away a rug in the field of a front seat. If necessary remove the channel of supply of hot air in a back part of salon.
|
|
|
- Separate the electrical wiring socket.
|
|
|
- Turn out screws and remove the sensor of blow of a side safety cushion.
|
|
|
At installation of the shooter (1) on the sensor of blow of a side safety cushion it has to be turned towards a channel. |
|
|
Antenna of remote control
|
|
- Remove finishing of the shelf behind a back seat (see the Head Kuzov).
|
|
- Disconnect an antenna cable from the control unit. To remove an adhesive tape and remove a cable.
|
- At installation you watch that the ends of the removed cable lay on the shelf horizontally.
|
|
|