14-2-osvetitelnye-pribory.html

14.2. Lighting fixtures

Adjustment of headlights

PERFORMANCE ORDER

Before adjustment of headlights perform the following operations: Install the car on a horizontal surface; Replace the damaged lenses and mirrors, and also the turned black glow lamps; Check and if necessary modify pressure in tires; Create load of 75 kg of the driver's seat; Fill a full tank of fuel or put in the luggage compartment freight with the corresponding weight; Check correctness of installation of headlights concerning a cowl (gaps); On models with manual adjustment of a tilt angle of headlights turn the regulator in situation 0; On models with automatic adjustment of a tilt angle of headlights after inclusion of headlights wait 30 with; On models with xenon headlights after inclusion of headlights wait 80 with, at this time the car has to be not mobile and not be exposed to vibrations; Expose the device for adjustment on a longitudinal axis of the car parallel to the plane on which there is a car. To establish to risk (M) on the device on the size (e). Divisions of a scale on the device show a bias (cm) during removal on 10 m. e — the Preset value of adjustment of headlights: after Schild on the headlight case in % (for example, 1.0% = 10 cm / 10 m = "10" on the device); Preset value of adjustment of fog lights: at all cars of 2.0% = 20 cm / 10 m = "20" on the device H — Height of the middle of a beam of light over the plane of installation of the car H — H - e = tag height over the plane of installation of the car — Central tag = center of the high beam headlamp M — Risk of the device for adjustment of headlights S — the Plane of installation of the car and device for adjustment of headlights Adjustment of headlights is made by means of ratchets (1 and 2). 1 — Adjustment on height 2 — Adjustment on the parties Unambiguously correct mutual provision of adjusting ratchets is impossible. Adjustment of a fog light on height is made by means of the adjusting screw (1) through the lower opening.