BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
14.1. General information, diagnostics of malfunctions
14.2. Lighting fixtures
14.3. Screen wipers and washers
14.4. Other electric equipment
14.4.1. Removal and installation of sensors and antennas of auxiliary systems
14.4.2. Removal and installation of control units
14.4.3. Removal and installation of switches
14.4.4. Removal and installation of a combination of devices and its components
14.4.5. Audioblock and loudspeakers
15. Schemes of electric equipment

Напольные покрытия из резиновой крошки


14.4. Other electric equipment

Removal and installation of sensors and antennas of auxiliary systems

Rain sensor


  1. Remove an internal rear-view mirror.
  1. Squeeze a cover from sides, displace it a little up, pick up and uncover.

At installation level a cover of rather sensitive element (black glass ceramics).

  1. Separate the socket.
  1. Extend fastening clips in the direction specified by an arrow and remove the rain sensor.
  1. At installation do not allow damage of the optical element which is under the rain sensor.

Sensors of system of the help at the parking


  1. Remove the central overlay of a rear bumper (see the Head Kuzov).
  1. Separate the socket and remove the sensor.
  1. Installation is made upside-down.

Sensors of side safety cushions


  1. Switch off ignition
  2. Remove a front seat and an overlay of a threshold from the relevant party (see the Head Kuzov).
  1. Cast away a rug in the field of a front seat. If necessary remove the channel of supply of hot air in a back part of salon.
  1. Separate the electrical wiring socket.
  1. Turn out screws and remove the sensor of blow of a side safety cushion.

At installation of the shooter (1) on the sensor of blow of a side safety cushion it has to be turned towards a channel.

Antenna of remote control


  1. Remove finishing of the shelf behind a back seat (see the Head Kuzov).
  1. Disconnect an antenna cable from the control unit. To remove an adhesive tape and remove a cable.
  1. At installation you watch that the ends of the removed cable lay on the shelf horizontally.

"previous page
14.3.4. Adjustment of nozzles of washing of a windshield
following page"
14.4.1. Removal and installation of sensors and antennas of auxiliary systems