BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.1.1. Removal and installation of a forward wing
13.1.2. Removal, installation and adjustment of doors
13.1.3. Removal, installation and adjustment of a cowl, replacement of its racks
13.1.4. Removal, installation and adjustment of a cover of the luggage compartment, replacement of its components
13.1.5. Removal and installation of a front bumper and its components
13.1.6. Removal and installation of a rear bumper and its components
13.1.7. Replacement and adjustment of mobile glasses of doors
13.2. Equipment of salon
14. Onboard electric equipment
15. Schemes of electric equipment




13-1-5-snyatie-i-ustanovka-perednego-bampera-i-ego-komponentov.html

13.1.5. Removal and installation of a front bumper and its components

Components of assembly of a front bumper

1 — the Side overlay of a bumper
2 — the Chromeplated side decorative level
3 — the Channel of an obduv of the brake system
4 — the Lower section of a decorative front grille
5 — the Rivet with the expansion plug
6, 7 — the Guard of fastening of registration plate

8 — the Central overlay of a bumper (model for the USA)
9 — the Cover of a towing eye
10 — the Towing eye
11 — the Overlay of a bumper
12 — the Protective fringing
13 — the Basic beam
14 — the Bolt with a cylindrical head
15 — the Shock damper
16 — the Arm
17 — the Insert


 PERFORMANCE ORDER

  1. Open a cowl.
  1. Turn out bolts from the left and right side and take off side aprons (1) of wheel arches.
  1. Turn out bolts of fastening shock a damper.
  1. Wring out the fixing ledges up and take away a bumper a little forward.
  1. On models with system of the help at the parking separate sockets of its sensors.
  1. Separate sockets (1) of an electrical wiring of the left and right fog lights. On models with washers of headlights remove a clamp (2), disconnect a hose (3) and take away it up or muffle.
  1. Pull a bumper on yourself and remove it.
  2. When replacing a bumper rearrange from an old bumper on new fog lights and their arms, washers of headlights, the panel of fastening of registration plate, channels of an obduv of the brake system, the lower decorative front grille and other decorative elements.

Side slips can be replaced without removal of a bumper, – wring out them from clamps by means of a plastic wedge.


  1. Installation is made upside-down. Height of a bumper is regulated by a vvorachivaniye of bolts with a head under a prutkovy key.


"previous page
13.1.4. Removal, installation and adjustment of a cover of the luggage compartment, replacement of its components
following page"
13.1.6. Removal and installation of a rear bumper and its components