BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
14.1. General information, diagnostics of malfunctions
14.2. Lighting fixtures
14.2.1. Adjustment of headlights
14.2.2. Removal and installation of headlights and their components
14.2.3. Removal and installation of other devices of external lighting
14.2.4. Removal and installation of devices of internal lighting
14.2.5. Replacement of lamps of devices of external lighting
14.2.6. Replacement of lamps of devices of internal lighting
14.3. Screen wipers and washers
14.4. Other electric equipment
15. Schemes of electric equipment




14-2-1-regulirovka-far.html

14.2.1. Adjustment of headlights

Adjustment of headlights

 PERFORMANCE ORDER

  1. Before adjustment of headlights perform the following operations:
    • Install the car on a horizontal surface;
    • Replace the damaged lenses and mirrors, and also the turned black glow lamps;
    • Check and if necessary modify pressure in tires;
    • Create load of 75 kg of the driver's seat;
    • Fill a full tank of fuel or put in the luggage compartment freight with the corresponding weight;
    • Check correctness of installation of headlights concerning a cowl (gaps);
    • On models with manual adjustment of a tilt angle of headlights turn the regulator in situation 0;
    • On models with automatic adjustment of a tilt angle of headlights after inclusion of headlights wait 30 with;
    • On models with xenon headlights after inclusion of headlights wait 80 with, at this time the car has to be not mobile and not be exposed to vibrations;
    • Expose the device for adjustment on a longitudinal axis of the car parallel to the plane on which there is a car. To establish to risk (M) on the device on the size (e). Divisions of a scale on the device show a bias (cm) during removal on 10 m.
e — the Preset value of adjustment of headlights: after Schild on the headlight case in % (for example, 1.0% = 10 cm / 10 m = "10" on the device);
Preset value of adjustment of fog lights: at all cars of 2.0% = 20 cm / 10 m = "20" on the device
H — Height of the middle of a beam of light over the plane of installation of the car
H — H - e = tag height over the plane of installation of the car
— Central tag = center of the high beam headlamp
M — Risk of the device for adjustment of headlights
S — the Plane of installation of the car and device for adjustment of headlights
  1. Adjustment of headlights is made by means of ratchets (1 and 2).
1 — Adjustment on height
2 — Adjustment on the parties

Unambiguously correct mutual provision of adjusting ratchets is impossible.


  1. Adjustment of a fog light on height is made by means of the adjusting screw (1) through the lower opening.


"previous page
14.2. Lighting fixtures
following page"
14.2.2. Removal and installation of headlights and their components