14-2-6-zamena-lamp-priborov-vnutrennego-osveshheniya.html

14.2.6. Replacement of lamps of devices of internal lighting

Lamps of the main saloon lamp

PERFORMANCE ORDER

Remove the ceiling lamp in collecting (see the Section Removal and installation of devices of internal lighting). On models with lamps of individual lighting turn a cartridge of the corresponding lamp counterclockwise and remove it. Take out a lamp. 1 — the Boss of a lamp of the left individual lamp 2 — the Boss of the main saloon lamp 3 — the Boss of a lamp of the right individual lamp On models without lamps of individual lighting turn out screws (1), remove the ceiling lamp (2) from the lens who is under it and remove lamps.

Lamp of a lamp of illumination of a cosmetic mirror

PERFORMANCE ORDER

Remove a mirror illumination lamp (see the Section Removal and installation of devices of internal lighting). Unclench contact arches (1) and remove a lamp (2).

Light-emitting diode of illumination of internal handles of doors

PERFORMANCE ORDER

Remove finishing of a door (see the Head Kuzov). Disconnect a light-emitting diode with a cable (1) from a flask (2). Cut off a cable (1) of a light-emitting diode length (And = 10 cm) from a door electrical wiring plait. Cut off the end of a wire of a new light-emitting diode 16 cm long. Connect a plait of an electrical wiring of a door and a cable of a light-emitting diode by means of a butt connector and kembrik. Record the site of repair on a door electrical wiring plait.