Removal and installation of a radiator of the cooling system. BMW the 7th E38 series (from 1994 to 2002 release)
 
BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
5.1. Engine cooling system
5.1.1. General information and precautionary measures
5.1.2. Removal and installation of a casing of the fan
5.1.3. Removal and installation of a radiator of the cooling system
5.1.4. Removal and installation of a broad tank
5.1.5. Removal and installation of the additional fan assembled with a casing
5.1.6. Removal and installation of the water pump
5.1.7. Removal and installation of the coupling of the drive of the fan
5.1.8. Removal and installation of the thermostat
5.1.9. Removal and installation of a collector of the cooling system
5.2. Systems of heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



5-1-3-snyatie-i-ustanovka-radiatora-sistemy-okhlazhdeniya.html

5.1.3. Removal and installation of a radiator of the cooling system

Models with engines, except M57 and M67

 PERFORMANCE ORDER

  1. Lower cooling liquid (see the Section Replacement of Cooling Liquid of the Head Nastroyki and routine maintenance of the car).
  2. Remove a fan casing (see the Section Removal and installation of a casing of the fan).
  1. On models with To/in separate the thermoswitch socket.
  1. Remove the top hose of the cooling system.
  1. Remove a spring bracket (1) and remove a water hose (2). Turn out bolts (3) on a radiator with left and on the right side and remove both arms (4).
  1. Remove the lower hose of the cooling system.
  1. Separate the socket of an electrical wiring (1), remove a spring bracket and remove a water hose (3).
  1. Release the right and left fastenings of a radiator, having pressed the screw-driver a latch.

For fastening installation strongly press it down (several clicks have to be heard), then pick up the screw-driver a uvula of fastening and press the screw-driver handle down.

  1. Take a cooling system radiator from a motive compartment the movement up.

At installation pay attention to rubber-metal hinges with left and on the right side – insert them in holders.


Rubber-metal hinge
Holder of the hinge
  1. Installation is made upside-down, in conclusion fill the cooling system and pump over it (see the Head Nastroyki and routine maintenance of the car).

Models with the M57 engine

 PERFORMANCE ORDER

  1. Close the generator to prevent hit on it motive oil, fuel or OZh.
  2. Lower cooling liquid (see the Section Replacement of Cooling Liquid of the Head Nastroyki and routine maintenance of the car).
  3. Remove a fan casing (see the Section Removal and installation of a casing of the fan).
  4. Disconnect the top and lower hoses of the cooling system from a radiator.
  5. Perform the operations described in paragraphs with 8 on 10.

Models with the M67 engine

 PERFORMANCE ORDER

  1. Remove a fan casing (see the Section Removal and installation of a casing of the fan).
  1. Turn out a stopper and lower cooling liquid.
  1. Separate the socket (1), weaken a collar (2) and disconnect a water hose. Remove a broad tank (3).
  1. Take out clamps (1) and disconnect water hoses (2).
Removal of the lower hose
  1. Perform the operations described in paragraphs with 8 on 10.


"previous page
5.1.2. Removal and installation of a casing of the fan
following page"
5.1.4. Removal and installation of a broad tank