6-2-3-snyatie-i-ustanovka-patrubka-mezhdu-raskhodomerom-vozdukha-i.html
6.2.3. Removal and installation of a branch pipe between a flowmeter of air and the case of a butterfly valveModels with the M60 engine
|
|
|
|
- On models with the ASC T system disconnect a hose (1), weaken collars (2) and remove an air inlet sleeve.
|
|
|
- On models without the ASC T system weaken collars (1 and 2) and disconnect a hose.
|
- Weaken a collar (2) and remove an air inlet sleeve.
|
|
Models with the M62 engine
|
|
|
|
- Disconnect the hose going to the valve of adjustment of turns of idling (IAC). Weaken a collar (1) and disconnect a branch pipe from the case of a butterfly valve.
|
|
|
- Turn out a bolt (1), separate the socket of the MAF sensor and remove the top section of the air cleaner together with a flowmeter of air and a branch pipe.
|
|
|
- Disconnect a flowmeter of air (1) from a branch pipe (2) and the resonator (3).
|
- Installation is made upside-down.
|
|
|
|