BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
9.1. General information
9.2. Search of malfunctions
9.3. Removal and AT installation and hydrotransformer
9.4. Removal and installation of the pallet of a case
9.5. Removal and installation of the PNP sensor
9.6. Removal and installation of the ATF filter and hydraulic block
9.7. Removal and installation Ý/m valves, regulators and sensors
9.8. Replacement of an arm of the mechanism of switching of the AT modes
9.9. Adjustment of the balance weight of switching
9.10. Adjustment of the lever of the selector
9.11. Adjustment and check of blocking of the lever of the selector
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



9-10-regulirovka-rychaga-selektora.html

9.10. Adjustment of the lever of the selector

The description for AT A5S 310Z/440Z/560Z is given below.


 PERFORMANCE ORDER

  1. Install the selector lever in situation "P".
  1. On models to 08.1995 g of the issue install adaptation No. 24 5 240 on the balance weight of the control unit and weaken a nut (2).
  1. On models from 08.1995 g of the issue, holding a clip (1), weaken a nut (2).
  1. On all models translate the balance weight (3) of the control unit (situation "P") forward. Press on draft (4) in the direction specified by an arrow and again release. Tighten a nut (2).


"previous page
9.9. Adjustment of the balance weight of switching
following page"
9.11. Adjustment and check of blocking of the lever of the selector