11-15-snyatie-i-ustanovka-datchikov-poperechnogo-uskoreniya-dsc3.html
11:15. Removal and installation of sensors of cross acceleration of DSC3
|
|
After replacement of sensors it is necessary to make their initialization what will require the diagnostic scanner. |
|
|
The sensor of level of turns since 09.1998 g of the issue performs also function of the sensor of cross acceleration. |
|
|
- Remove the driver's seat, the left lower panel of finishing of a rack of a door and an internal overlay of a threshold of a forward door (see the Head Kuzov).
|
|
- Raise the finishing panel (1) of the bottom and take it aside. Separate the socket (2/1), turn out bolts (3/2) and take out the sensor of cross acceleration/level of turns (3).
|
|
|
|
|
- On models to 09.1998 g of the issue for removal of the sensor of level of turns remove its casing.
|
- Separate the socket (1), turn out bolts (2) and take out the sensor of level of turns.
- Installation is made upside-down.
|
|
|
|