BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
11.1. General information and security measures
11.2. Replacement of brake shoes
11.3. Removal and installation of brake disks
11.4. Removal and installation of supports
11.5. Replacement of brake shoes of the parking brake and their razzhimny mechanism
11.6. Adjustment of the parking brake
11.7. Removal and installation of cables and pedal of the drive of the parking brake
11.8. Removal of D/V of stoplights and pedal of a working brake
11.9. Removal and GTTs installation and its tank
11:10. Removal and installation of the one-pass valve of the vacuum amplifier
11:11. Removal and installation of the vacuum amplifier
11:12. Removal and installation of wheel sensors
11:13. Removal and installation of an electronic control unit of the ABS/ASC+T/DSC systems
11:14. Removal and installation hydromodulator of the ABS/ASC+T/DSC systems
11:15. Removal and installation of sensors of cross acceleration of DSC3
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



11-6-regulirovka-stoyanochnogo-tormoza.html

11.6. Adjustment of the parking brake

High-quality adjustment of the parking brake is possible only during the normal work and ease of the course of a cable of the drive of a brake and all mobile details.

Adjustment of brake shoes

 PERFORMANCE ORDER

  1. Completely give an adjusting nut of the left cable.
  1. Completely turn out on each back wheel on one bolt of its fastening then turn a wheel so that the carving opening on the right wheel was in situation "7 hours", and on left - "5 hours".
  1. Tighten the adjusting screw until blocking of a wheel and turn out the adjusting screw on 8 clicks of a clamp.

Adjustment of a cable of the drive

 PERFORMANCE ORDER

  1. Completely release the parking brake.
  2. Tighten an adjusting nut of the left cable so that back wheels could hardly rotate.
  3. Evenly press 10 times a pedal of the drive of the parking brake to the sixth tooth of a ratchet.
  4. Record a pedal of the parking brake on the third tooth of a ratchet.
  5. Give an adjusting nut so that back wheels were hardly scrolled by hand.
  6. Check braking force: at raising on 1 tooth – the wheel has to be free (it is easily scrolled by hand), and at raising on 4 teeth – not movably (is not scrolled by hand).

Extra earnings of the mechanism of the parking brake

 PERFORMANCE ORDER

  1. At the movement on the certain platform or on the road with not heavy traffic press speed of 40 km/h on a pedal of the drive of the parking brake and you keep it until influence of brake effort is felt (coupling is switched off, transmission in neutral situation).
  2. To press a pedal of the drive of the parking brake before fixing on the following tooth of a ratchet and be passed by 200 more m.
  3. Repeat the actions described in paragraphs 10 and 11 once again.


"previous page
11.5. Replacement of brake shoes of the parking brake and their razzhimny mechanism
following page"
11.7. Removal and installation of cables and pedal of the drive of the parking brake