BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
3.1. General information
3.2. General information about settings and adjustments
3.3. Schedule of routine maintenance
3.4. Check of levels of liquids, control of leaks
3.5. Check of a state and replacement of hoses and tubes in a motive compartment, localization of leaks
3.6. Replacement of motive oil and oil filter
3.7. Clearing and replacement of the fuel filter
3.8. Check of the brake system and coupling
3.9. Check of a condition of system of production of the fulfilled gases
3.10. Check of a condition of components of a suspension bracket and steering
3.11. Check of a condition of protective covers of CV JOINTS of power shafts
3.12. Replacement of the AT gearbox oil
3.13. Replacement of brake fluid and pumping of the brake system
3.14. Replacement of spark plugs
3.15. Replacement of the saloon filter (system of ventilation)
3.16. Replacement of the filtering air cleaner element
3.17. Replacement of cooling liquid
3.18. Check of a condition of tires and pressure of their rating
3.19. Check of a condition of the battery and care of it
3.20. Check of a condition of a belt of the drive of auxiliary units
3.21. Check of a condition of brushes of screen wipers and adjustment of nozzles of washers
3.22. Replacement of oil of the main transfer
3.23. Check of thickness of the conducted clutch plate
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment

3-15-zamena-salonnogo-filtra-sistemy-ventilyacii.html

3.15. Replacement of the saloon filter (system of ventilation)

 PERFORMANCE ORDER

  1. Turn out screws and uncover the filter.
  1. Release the filter from clamps and remove it.
  1. Clear a cover of the filter and an inlet opening in it.
  2. Installation is carried out in the sequence, the return to removal.

"previous page
3.14. Replacement of spark plugs		 following page"
3.16. Replacement of the filtering air cleaner element