BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
3.1. General information
3.2. General information about settings and adjustments
3.3. Schedule of routine maintenance
3.4. Check of levels of liquids, control of leaks
3.5. Check of a state and replacement of hoses and tubes in a motive compartment, localization of leaks
3.6. Replacement of motive oil and oil filter
3.7. Clearing and replacement of the fuel filter
3.8. Check of the brake system and coupling
3.9. Check of a condition of system of production of the fulfilled gases
3.10. Check of a condition of components of a suspension bracket and steering
3.11. Check of a condition of protective covers of CV JOINTS of power shafts
3.12. Replacement of the AT gearbox oil
3.13. Replacement of brake fluid and pumping of the brake system
3.14. Replacement of spark plugs
3.15. Replacement of the saloon filter (system of ventilation)
3.16. Replacement of the filtering air cleaner element
3.17. Replacement of cooling liquid
3.18. Check of a condition of tires and pressure of their rating
3.19. Check of a condition of the battery and care of it
3.20. Check of a condition of a belt of the drive of auxiliary units
3.21. Check of a condition of brushes of screen wipers and adjustment of nozzles of washers
3.22. Replacement of oil of the main transfer
3.23. Check of thickness of the conducted clutch plate
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



3-16-zamena-filtruyushhego-ehlementa-vozdukhoochistitelya.html

3.16. Replacement of the filtering air cleaner element

M51 engine

 PERFORMANCE ORDER

  1. Extend a cover of the air filter up.
  1. Take the old filtering element and establish new, previously having cleaned channels from a fence and an air outlet.
  1. Close a cover.

M52, M57 engines

The description for the M52 engine is given below. Replacement of the filtering element on the M57 engine is made similarly.


 PERFORMANCE ORDER

  1. Disconnect a corrugated hose from a cover of the air filter.
  1. Turn out 4 bolts on the top part of a cover.
  1. Raise and cast away an air cleaner cover. Take the filtering element from the air cleaner case.
  2. Clear the case and establish the new filtering element.
  3. Establish into place a roof and reliably connect to it a corrugated hose.

For installation of a cover at first it should be hung from below.

M60, M62, M67 engines

 PERFORMANCE ORDER

  1. Wring out brackets (1).

1 — Brackets
2 — the Hose

1 — Brackets
2 — the Collar of fastening of an air hose
3 — the Hose
  1. On M60 B30 and M67 engines weaken a collar of fastening of an air hose (2) and disconnect a hose.
  2. On the M62 engine separate the socket of an electrical wiring of the sensor of temperature of the soaked-up air (IAT).
  3. On the M67 engine separate the socket of a raskhodometr of air.
  4. Remove the top part of the case of the air cleaner.
  5. Take the filtering element from the lower part of the case of the air cleaner, wipe the case and establish the new filtering element.
  6. Install the being removed components.

M73 engine

 PERFORMANCE ORDER

  1. On the right number of cylinders perform the operations described in paragraphs with 2 on 4.
  1. Press a clamp (2) and separate the socket (1).
  1. Wring out brackets (1), weaken a collar (2) and disconnect a hose.
  1. Separate the socket (3), raise and remove the top cover of the air cleaner.
  1. On the left number of cylinders wring out brackets (1), weaken a collar (2) and disconnect a hose. Separate the socket (3) and remove the top cover of the air cleaner.
  1. Take the filtering element from the lower part of the case of the air cleaner, wipe the case and establish the new filtering element. Install the being removed components.


"previous page
3.15. Replacement of the saloon filter (system of ventilation)
following page"
3.17. Replacement of cooling liquid