BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.2. Equipment of salon
13.2.1. Removal and installation of window regulators
13.2.2. Removal and installation of finishing and sound insulation of a forward door
13.2.3. Removal and installation of finishing and sound insulation of a back door
13.2.4. Removal and installation of panels of finishing of racks of a body and ceiling
13.2.5. Removal and installation of finishing of the dashboard
13.2.6. Removal and installation of the shelf behind a back seat and blinds of back glass
13.2.7. Removal and installation of overlays of thresholds of doors
13.2.8. Removal and installation of elements of finishing of the luggage compartment and its cover
13.2.9. Removal and installation of front seats
13.2.10. Removal and installation of a back seat
13.2.11. Removal and installation of seat belts
13.2.12. Removal and installation of a cover of the top hatch
14. Onboard electric equipment
15. Schemes of electric equipment



13-2-6-snyatie-i-ustanovka-polki-za-zadnim-sidenem-i.html

13.2.6. Removal and installation of the shelf behind a back seat and blinds of back glass

 PERFORMANCE ORDER

  1. Remove finishing of back racks of a body (see the Section Removal and installation of panels of finishing of racks of a body and ceiling).
  2. On models without э / the drive of a back seat remove both backs of a back seat.
  3. On models with э / the drive of a back seat wring out clamps and remove levels in the top part of backs of back seats.
  1. Open a ware box in the top part of an average armrest, wring out a latch and remove a ware box the movement up.
  1. On models with a sun-protection blind of back glass give fixture from the luggage compartment,
 

... separate the socket (1) and hang out a wire (2).

  1. Pick up and take out clamps and remove the shelf advance.

When replacing the shelf rearrange ventilation lattices from the old shelf on new.


  1. If necessary remove a sun-protection curtain of back glass. For this purpose give nuts,

... pick up and take out the left and right slips (1), unhook and remove a sun-protection curtain (2).



"previous page
13.2.5. Removal and installation of finishing of the dashboard
following page"
13.2.7. Removal and installation of overlays of thresholds of doors