13-2-8-snyatie-i-ustanovka-ehlementov-otdelki-bagazhnogo-otdeleniya-i-ego-kryshki.html
13.2.8. Removal and installation of elements of finishing of the luggage compartment and its coverGuards in finishing of the luggage compartment
|
|
- Open the luggage compartment and remove finishing of its floor (1).
|
|
At installation pay attention to correctness of provision of tension belts (2). |
|
- On the left side of models with system of navigation remove the computer of this system, lift latches (1) and remove a framework (2).
|
|
- On models with a CD changer open its cover (1), unblock a bayonet lock (2) and cast away a guard (3).
|
|
- On models with a CD changer disconnect the back panel of finishing (1) and lift it over a CD changer (2). Investigate plastic screw connection (3) and separate finishing details.
|
|
At installation squeeze plastic screw connection. |
|
- On the right side release clamps and cast away a guard. Pick up and take out clamps (1) and remove a guard.
|
|
|
Finishing of wheel arches from the luggage compartment
|
- Remove the corresponding guard in the luggage compartment.
|
- On models with a cover for transportation of skis take out a clamp (1), remove the panel of finishing of a wheel arch (2) from the luggage compartment, lift the panel over a fixing eye (3) and disconnect from a cover framework for transportation of skis (4).
|
|
|
At installation at first fasten the panel to a cover framework for transportation of skis (4). |
|
- When replacing investigate plastic screw connection (1) and separate details of finishing (2) and (3).
|
|
At installation squeeze plastic screw connection (1). |
|
|
Finishing of a cover of the luggage compartment
|
|
- Open the luggage compartment, pick up and take out caps (1) and turn out the bolts which are under them.
|
- Open a box for tools, disconnect the tape limiter of the course at towage and remove a box for tools the movement up.
|
- On models with the automatic drive of a cover of the luggage compartment pick up and take out a cap (1), turn out a bolt and remove the handle.
|
- Through the opening formed after removal of the handle squeeze out the microswitch outside and separate its socket. Pick up and remove a protective framework of the microswitch.
|
- Remove the lighting lamp of the luggage compartment. Take out a cap (1), turn out a bolt and remove the handle. Pick up and take out clamps (2) and remove a protective overlay of the lock of a trunk lid.
|
- Unclench clips on all perimeter and remove finishing of a cover of the luggage compartment.
- At installation replace the damaged clamps.
|
|
|
|