BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.2. Equipment of salon
13.2.1. Removal and installation of window regulators
13.2.2. Removal and installation of finishing and sound insulation of a forward door
13.2.3. Removal and installation of finishing and sound insulation of a back door
13.2.4. Removal and installation of panels of finishing of racks of a body and ceiling
13.2.5. Removal and installation of finishing of the dashboard
13.2.6. Removal and installation of the shelf behind a back seat and blinds of back glass
13.2.7. Removal and installation of overlays of thresholds of doors
13.2.8. Removal and installation of elements of finishing of the luggage compartment and its cover
13.2.9. Removal and installation of front seats
13.2.10. Removal and installation of a back seat
13.2.11. Removal and installation of seat belts
13.2.12. Removal and installation of a cover of the top hatch
14. Onboard electric equipment
15. Schemes of electric equipment


Садовые качели своими руками


13-2-7-snyatie-i-ustanovka-nakladok-porogov-dverejj.html

13.2.7. Removal and installation of overlays of thresholds of doors

Thresholds of forward doors

 PERFORMANCE ORDER

  1. Slightly raise an overlay of a threshold and extend it from clamps advance.
  1. Remove clips from the body bottom.
  1. At installation insert an overlay of a threshold into clips, replace the damaged clamps.

Thresholds of back doors

 PERFORMANCE ORDER

  1. Remove a back seat (see the Section Removal and installation of a back seat).
  1. Give a nut (1), delay a sound-proof covering (2) back and turn out a bolt (3).
  1. Wring out clamps and remove a slip (4) thresholds the movement up.
  2. At installation insert, replace the damaged clamps (see an illustration).


"previous page
13.2.6. Removal and installation of the shelf behind a back seat and blinds of back glass
following page"
13.2.8. Removal and installation of elements of finishing of the luggage compartment and its cover