BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.2. Equipment of salon
13.2.1. Removal and installation of window regulators
13.2.2. Removal and installation of finishing and sound insulation of a forward door
13.2.3. Removal and installation of finishing and sound insulation of a back door
13.2.4. Removal and installation of panels of finishing of racks of a body and ceiling
13.2.5. Removal and installation of finishing of the dashboard
13.2.6. Removal and installation of the shelf behind a back seat and blinds of back glass
13.2.7. Removal and installation of overlays of thresholds of doors
13.2.8. Removal and installation of elements of finishing of the luggage compartment and its cover
13.2.9. Removal and installation of front seats
13.2.10. Removal and installation of a back seat
13.2.11. Removal and installation of seat belts
13.2.12. Removal and installation of a cover of the top hatch
14. Onboard electric equipment
15. Schemes of electric equipment




13-2-9-snyatie-i-ustanovka-perednikh-sidenijj.html

13.2.9. Removal and installation of front seats

 PERFORMANCE ORDER

  1. Move a front seat as much as possible forward and up. Switch off ignition.
  1. Turn out a bolt of fastening of a seat belt.
  1. Unblock a stopper (1) the movement on yourself and take out the movement inside. Remove a cable (2) drives of the mechanism of adjustment of a seat belt on height the movement from yourself.
  1. Move a front seat as much as possible forward, slightly raise (1) central slip for the fixing element, release (2) and raise uvulas of internal clips and remove (3) slip the movement on yourself.

At non-compliance with the sequence of operations at removal the crossing point (4) can be broken and the slip is damaged.


  1. Separate the electrical wiring socket.
  1. Turn out bolts and move a front seat as much as possible back.

At installation replace bolts, or process old bolts structure of Loctite 270.

  1. On models till 1995 of the issue unclench forward clips and remove a slip the movement from yourself.
  1. Turn out bolts and remove a front seat.

At installation replace bolts, or process old bolts structure of Loctite 270.

  1. Installation is made upside-down. Do not allow hit of edges of a rug between guides of a seat and the bottom of a body in places of their fastening. Before final tightening of bolts all bolts have to be screwed by hand, and the seat is leveled.


"previous page
13.2.8. Removal and installation of elements of finishing of the luggage compartment and its cover
following page"
13.2.10. Removal and installation of a back seat